Welcome


Welcome to Busch Plastering and Stucco. Please leave your feed back and any questions you might have. Thank you for visiting and please visit again for more updates.

Thursday, November 13, 2014

Smooth Coat Plaster Remodel - Re-Coat



  • Step 1 - Scrape off any loose plaster and use mesh tape to cover cracks, corners, and holes.
  • Step 2- Use a good bonding agent ( Glue) that can get rolled onto the walls with a paint roller. Mix glue with 50-70% part water.
  • Step 3- Apply a scratch coat of veneer plaster to fill in the wall and make if more flat. Make sure to run your corners with either a tool or angle brush. ( Small paint brush works well )
  • Step 4 - Once scratch coat is dry, go over with another coat. This coat should be as smooth as possible to avoid more work troweling down the surface.
  • Step 5 - Use a plaster mop to trowel down the plaster once it has started to set.
  • Step 6 - Wait 2 weeks for plaster to cure and then paint.

Visit Us Online @ Plasteringandstucco.com